It is easy to handle with a lot of options to control.

• Supported system B737
• Supports Customized Checklists created by yourself for Your needs or different A/C's !
• Auto Check or Manual Check selectable
  - Auto Check, detects pmSystems (default logic file) and needed FS status information
  - Manual Check, if NO pmSystems is used or in a different configuration use
• full Keyboard control
• full Mouse control
• full Offset control via FSUIPC/WideFS
• separate Control Panel, installed on a different PC via FSUIPC/WideFS
• Hide / Visible status to be visible overlapped of e.g. ND display or another Display.
• Resize-able up to 1280 x 1024, Position and Size is saved
• Font Size, Color (green or white) and Bold is set-able
• each Checklist can be cleared, one or multiple

Checklists / Function for B737

• RECEIVING COCKPIT
• BEFORE ENGINE START
• CLEARED FOR ENGINE START
• ENGINE START
• AFTER ENGINE START
• BEFORE TAKEOFF
• CLEARED FOR TAKEOFF
• AFTER TAKEOFF
• DECENT
• APPROACH
• LANDING
• AFTER LANDING
• PARKING
• TERMINATION
• CLEAR CHECKLIST(S), one or more Checklist(s) can be cleared
• Create your own Checklists for your needs or different A/C's
• up to 20 Checklists
• up to 50 Checklist points per Checklist
• useable for any Aircraft
• useable e.g. for ONLINE FLYING to create your Online-Flying-Checklists, you will never
• forget your important things to do and your Controller will be amazed

The Electronic Checklist brings you to no paper need!
Create Your Own Checklists !!
The Electronic Checklist is a nearly full automatic Checklist system that checks all available clear settable positions and settings in the decided Checklist, in B737 Mode when pmSystems is connected only
In Customer Mode you can create your own needed Checklists, up to 20 Checklists with 50 Points for each!
The Electronic Checklist is by Key / Offset (registered FSUIPC) / Control Panel (registered FSUIPC) controlled / setable.
It is as well setable to VISIBLE / HIDE, so you can switch it to ON / OFF to don't have it as interference factor in view.

B737 - Mode, pmSystems is connected.
The Pilot needs to set the requested Configurations and when the request is fulfilled the next Checklist Point will be selected by automatic.

B737 Manual - Mode, pmSystems is NOT connected.
The Pilot needs to set the requested Configurations if available and needs to mark the Checklist Points as CHECKED; the next Checklist Point will be selected by automatic.

Customer - Mode, NO Project Magenta software and NO FSUIPC is needed!
You are able to create Your own Checklists with your to your fulfills. Up to 20 Checklists with up to 50 Check-Points for each.

TSR Electronic Checklist overlapped of an display like EICAS / ND / ... but you can place it of course overlapped on any display of your choise, just resize and move.

You can any time SHOW or HIDE the Checklist by Keyboard or Offset (as well over the network from a different PC via WideFS and FSUIPC)